@article { author = {Sheikhi, Vahid and Ghasemi, Mehdi and Sareban, Malihe}, title = {Effect of Penetration and Temperature on the Performance Specification of Bitumen}, journal = {Road}, volume = {31}, number = {114}, pages = {81-90}, year = {2023}, publisher = {}, issn = {1735-062X}, eissn = {2676-4261}, doi = {10.22034/road.2022.319362.2006}, abstract = {In this study, the effect of penetration and temperature changes on the performance specifications of bitumen was investigated experimentally. In this regard, it was ensured that the bitumens were obtained from a constant raw material and oxidation process at different times from the reactor. Experiments were carried out on bitumen with different penetration grades of 35, 40, 50, 55 and 60 (1⁄10 mm ). The effect of changes in the penetration grades and temperature were investigated on various quality parameters of bitumen, including bitumen specifications at high and medium temperatures, after initial and long-term aging, using rheological behavior tests by dynamic shear rheometer, thin film oven and pressurized aging vessel and the corresponding comparison diagrams were drawn. The results show that the rutting resistance or permanent deformation of bitumen in both binder and residual bitumen of thin film oven test was decreased with increasing temperature in a bitumen with a constant penetration grade and also increasing the penetration grade at a constant temperature. The Fatigue cracking index in the residual bitumen of the thin film oven and pressurized aging vessel, was decreased with increasing temperature in a bitumen with a constant penetration grade and also increasing the penetration grade at a constant temperature.}, keywords = {penetration,Temperature,Rutting,Fatigue cracking}, title_fa = {تاثیر درجه نفوذ و دما بر روی مشخصات عملکردی قیر}, abstract_fa = {در مقاله حاضر، تاثیر تغییرات درجه نفوذ و دما بر روی مشخصات عملکردی قیرها مورد بررسی تجربی قرار گرفت. در این راستا اطمینان حاصل شد که قیرها از یک ماده اولیه و یک فرایند اکسیداسیون ثابت و در زمان های مختلف از راکتور برداشت شده باشند تا نوع ماده اولیه تاثیری بر روی نتایج آزمون نداشته باشد. آزمایش ها بر روی قیر با درجه نفوذهای مختلف 35، 40، 50، 55 و 60 (دهم میلیمتر) انجام گرفتند. تاثیر تغییرات درجه نفوذ و دما بر روی پارامترهای مختلف کیفی قیر از جمله مشخصات قیر در دماهای بالا و متوسط، پس از پیرشدگی اولیه و پیرشدگی طولانی مدت با استفاده از آزمایش های بررسی رفتار رئولوژی به وسیله رئومتر برشی دینامیکی، پیرشدگی اولیه با آون لایه نازک متحرک و پیرشدگی ثانویه با محفظه تحت فشار مورد بررسی قرار گرفت و نمودارهای مقایسه ای مربوطه رسم گردید. نتایج نشان می دهند که مقاومت شیارافتادگی یا تغییر شکل ماندگار قیر در هر دو حالت قیر اولیه و قیر پسماند فرایند پیرشدگی لایه نازک، با افزایش دما در یک قیر با درجه نفوذ ثابت و همچنین افزایش درجه نفوذ در یک دمای ثابت، کاهش می یابد و تغییرات شاخص ترک خوردگی ناشی از خستگی در قیر پسماند حاصل از فرایند پیرشدگی لایه نازک و فرایند پیرشدگی تحت فشار با افزایش دما در یک قیر با درجه نفوذ ثابت و همچنین افزایش درجه نفوذ در یک دمای ثابت، کاهش می یابد.}, keywords_fa = {درجه نفوذ,دما,شیارافتادگی,ترک خوردگی ناشی از خستگی}, url = {https://road.bhrc.ac.ir/article_149574.html}, eprint = {https://road.bhrc.ac.ir/article_149574_90b86ad9ce8bc5746f98d4569c966c80.pdf} }