Evaluation of Mechanical Performance of Fly Ash-Based Geopolymer Concrete Modified with Acrylic Latex and Alkali-Resistant Glass Fibers

Document Type : Original Article

Authors
1 Department of Civil Engineering, KI.C., Islamic Azad University, Kish, Iran
2 Department of Civil Engineering, Ro.C., Islamic Azad University, Roudehen, Iran
3 Department of Civil Engineering, Ha.C., Islamic Azad University, Hamedan, Iran
4 Department of Civil Engineering, Ka.C., Islamic Azad University, Karaj, Iran
Abstract
Considering the increasing demand in the road and pavement industry for sustainable, durable, and environmentally friendly materials, geopolymer concrete has attracted attention as a suitable alternative to Portland cement concrete. This study investigated the simultaneous effect of acrylic latex and alkali-resistant glass fibers on the mechanical properties of Class F fly ash-based geopolymer concrete. An alkaline activator solution with a molarity of 14 M was prepared, and specimens were fabricated with three latex contents (5%, 10%, and 15%) and three fiber volume fractions (0.4%, 0.6%, and 0.8%). Microstructural evaluation via X-ray diffraction (XRD) revealed the presence of quartz, calcite, and mullite phases, indicating the stability of mineral phases and the proper formation of the geopolymeric structure. Mechanical test results indicated that compressive strength increased up to the optimum values of 10% latex and 0.6% fibers, reaching a maximum of 59.36 MPa. The highest tensile strength (7.40 MPa) and flexural strength (10.40 MPa) were observed in the specimen containing 15% latex and 0.8% fibers. Acrylic latex improves mechanical performance by forming polymer films and enhancing matrix cohesion, while glass fibers contribute through crack control and increased stress transfer capacity. Furthermore, the optimal mix design for compressive strength differs from that for tensile and flexural strengths; therefore, the mix design should be selected based on the intended performance criteria. Given its suitable mechanical strengths and superior crack-control capacity, the modified geopolymer concrete investigated in this study can be considered a viable option for concrete pavements, airport runways, and other transportation infrastructures.
Keywords

-Badkul, A., Paswan, R., Singh, S. K., & Tegar, J. P. (2022). A comprehensive study on the performance of alkali activated fly ash/GGBFS geopolymer concrete pavement. Road Materials and Pavement Design, 23(8),
1815-1835.
-Chelluri, S., Hossiney, N., Chandra, S., Bekoe, P., & Tia, M. (2025). A Review of the Performance Properties of Geopolymer Pavement-Quality Concrete. Construction Materials, 5(3), 49.
-Haddaji, Y., Majdoubi, H., Tayeh, B., et al. (2026). Multi-Environmental Durability of Geopolymer Composites: Mechanisms of Degradation and Performance Enhancement. International Journal of Pavement Research and Technology.
-Horpibulsuk, S., Hoy, M., Witchayaphong, P., Rachan, R., & Arulrajah, A. (2017, November). Recycled asphalt pavement–fly ash geopolymer as a sustainable stabilized pavement material. In IOP conference series: materials science and engineering, Vol. 273, No. 1, 012005.
IOP Publishing.
-Khasawneh, M. A. (2025). Geopolymer Concrete in Construction Projects: A Review. Discover Civil Engineering, 2, 124.
-Kumar, P., Gaurav, G., Kotoky, N., et al. (2026). A Critical Review and Analysis of Fly
Ash-Based One-Part Geopolymer. Innovative Infrastructure Solutions.
-Meskhi, B., Beskopylny, A. N., Stel'makh, S. A., Shcherban', E. M., Mailyan, L. R., Shilov, A. A., & Özkılıç, Y. O. (2023). Analytical Review of Geopolymer Concrete: Retrospective and Current Issues. Materials, 16(10), 3792.
doi.org/10.3390/ma16103792
-Nanda, R. P., & Priya, N. (2024). Geopolymer as stabilising materials in pavement constructions: A review. Cleaner Waste Systems, 7, 100134.
Ngayakamo, B. H., & Ikotun, B. D. (2026). Geopolymer Concrete for Sustainable Construction: Exploring Materials, Properties, Challenges and Future Prospects. Discover Concrete and Cement.
-Patil, S., & Joshi, D. A. (2025). Design of highly workable geopolymer concrete for rigid pavement by experimental investigation. Innovative Infrastructure Solutions, 10(1), 7.
-Patil, S., Joshi, D. A., Menon, R., & Wadhwa, L. K. (2023). Environmental impact assessment of fly ash and GGBS based geopolymer concrete in road construction. In E3S web of conferences, Vol. 405, 03021. EDP Sciences.
-Poltue, T., Suddeepong, A., Horpibulsuk, S., Samingthong, W., Arulrajah, A., & Rashid,
A. S. A. (2020). Strength development of recycled concrete aggregate stabilized with fly ash-rice husk ash based geopolymer as pavement base material. Road Materials and Pavement Design, 21(8), 2344-2355.
-Pratap, B., Mondal, S., & Rao, B. H. (2023). Development of geopolymer concrete using fly ash and phosphogypsum as a pavement composite material. Materials Today: Proceedings, 93, 35-40.
-Rathnayaka, M., Karunasinghe, D., Gunasekara, C., Wijesundara, K., Lokuge, W., & Law, D. W. (2024). Machine learning approaches to predict compressive strength of fly ash-based geopolymer concrete:
A comprehensive review. Construction and Building Materials, 419, 135519.
-Sathe, S., Wadki, V., Shekokar, S., Khungar, H., & Biswas, A. (2026). Exploring the Effectiveness of Hybrid Fiber–Reinforced Geopolymer Concrete. Journal of Structural Design and Construction Practice.
-Shakor, P., Hasan, S., Awuzie, B. O., Singh, A. K., Rauniyar, A., & Karakouzian, M. (2023). Evaluating the potential of geopolymer concrete as a sustainable alternative for thin white-topping pavement. Frontiers in Materials, 10, 1181474.
doi.org/10.3389/fmats.2023.1181474
-Sharma, U., Gupta, N., Bahrami, A., Özkılıç, Y. O., Verma, M., Berwal, P., & Islam, S. (2024). Behavior of Fibers in Geopolymer Concrete: A Comprehensive Review. Buildings, 14(1), 136.
doi.org/10.3390/buildings14010136
-Sofri, L. A., Abdullah, M. M. A. B., Sandu,
A. V., Imjai, T., Vizureanu, P., Hasan, M. R. M., & Rahman, F. A. (2022). Mechanical performance of fly ash based geopolymer (FAG) as road base stabilizer. Materials, 15(20), 7242.
-Tahir, M. F. M., Abdullah, M. M. A. B., Rahim, S. Z. A., Mohd Hasan, M. R., Sandu, A. V., Vizureanu, P., ... & Kadir, A. A. (2022). Mechanical and durability analysis of fly ash based geopolymer with various compositions for rigid pavement applications. Materials, 15(10), 3458.
-Tahir, M. F. M., Abdullah, M. M. A. B., Rahim, S. Z. A., Mohd Hasan, M. R., Sandu, A. V., Vizureanu, P., ... & Kadir, A. A. (2022). Mechanical and durability analysis of fly ash based geopolymer with various compositions for rigid pavement applications. Materials, 15(10), 3458.
-Wongkvanklom, A., Posi, P., Wongsa, A., Zaetang, Y., & Yodsudjai, W. (2025). Enhanced strength reduced modulus high calcium FA geopolymer concrete containing recycled aggregate concrete and Portland cement. Cleaner Waste Systems, 100384.
-Yue, J., Nie, X., Wang, Z., Liu, J., & Huang, Y. (2022). Research on the pavement performance of slag/fly ash-based geopolymer-stabilized macadam. Applied Sciences, 12(19), 10000.
-Zhang, X., et al. (2023). Characteristics of fly ash-based geopolymer concrete in the field for 4 years. Construction and Building Materials, 382, 131222