Identification and analysis of design risks of fast cable construction structures by sorting and scoring method

Document Type : Original Article

Authors

1 Department of Civil Engineering, IHU, Tehran, Iran.

2 M.Sc., Grad., Mehr Alborz University (MAU), Tehran, Iran.

10.22034/road.2022.337316.2039

Abstract

Risk management is one of the most important aspects of the project. Risk management includes various areas such as planning, identifying, evaluating and controlling risk. In construction projects, due to the fact that the process of project implementation is known before the start, first the project risks are identified so that in case of encountering them during implementation, principled and efficient measures are taken. In research and development projects; Risk management is used to improve project implementation process, cost management, increase project profitability and is effective as a scientific and effective tool to reduce risk and loss. One of the most common methods of risk identification is to use the Delphi method and consult experts and the project team. This study identifies the risks of the design phase of the research and development project of rapid cable structure design, for this purpose 313 risks identified in eight groups of general executive risks: structural, mechanical, geotechnical and foundation, then three proposed designs were developed according to the evaluation of the severity of the effect and the probability of risks, and eight designs were obtained. According to the results obtained from the risks, these eight designs with eight criteria of fast construction, portability, These two methods are among the oldest methods of multi-criteria selection. In the scoring method, the score is at the disposal of experts, but in the method of sorting designs, they are placed in order. Finally, the selected designs were determined according to the effective parameter of span length.

Keywords


-آهنگری، ک. و گلستانی­فر، م. و عباس­زاده، م.، (1390)، "ملاحظات تصمیم گیری در انتخاب روش­های پایدارسازی شیروانی مخازن سدها"، هفتمین کنفرانس زمین­شناسی مهندسی و محیط زیست ایران، شاهرود.
-ارشدنژاد، ش.، (1398)، "الگوریتم سلسله مراتبی SBMR برای انتخاب بهترین راه دسترسی به معادن"، جاده، 27(98)، ص.166-157.
-توکلی­کاشانی، ع. و عزیزی بندرآبادی، م.، (1397)، "معرفی روش‌های تصمیم‌گیری چند شاخصه و کاربرد آن در برنامه‌ریزی حمل‌ونقل و ترافیک، جاده، 26(94)، ص.54-39.
-خاتمی، س.ر.، خاتمی، س.ش.، حجت­پناه، ش. و معهود، م.، (1398)، "­چهارمین کنگره بین­المللی مهندسی"، تکنولوژی و علوم کاربردی – نیوزلند.
-خاکی، غ.ر.، (1378)، "روش تحقیق با رویکردی به پایان نامه نویسی، تهران: مرکز تحقیقات علمی کشور با همکاری کانون فرهنگی انتشارات درایت".
-خاکی، غ.ر.، (1379)، "روش تحقیق در مدیریت، تهران: دانشگاه آزاداسلامی، مرکز انتشارات علمی بازتاب.
-خواجه­زاده، ح. و امامی­نمینی، زه و حجت پناه، ش.، (1399)، "شناسایی و تحلیل ریسک پروژه استارت آپی تأسیس کارخانه تولید کاغذ از گلبرگ زعفران"، اولین همایش ملی تحقیقات میان رشته ای در علوم مهندسی و مدیریت، تهران.
-سرهادی، م. و زمانی، ا.، (1396)، "مدیریت پروژه‌های تحقیق و توسعه"، انتشارات مرکز تحقیقات و توسعه سازمان اتکا.
-شهریاری، س. و معهود، م. و حجت­پناه، ش. محسنی، م.، (1397)، "تجزیه وتحلیل ریسک­های تاثیرگذار در انتخاب پیمانکار با استفاده از روش یکپارچه AHP_DEA: مطالعه موردی بزرگراه طبقاتی صدر شهر تهران"، پنجمین کنفرانس ملی دستاوردهای اخیر در مهندسی عمران، معماری و شهرسازی، تهران.
-صادقپور، ا.ج.، تفرشی، ف.، (1400)، "ارزیابی انواع مکانیزم‌های تغییر شکل در ساختمان پل‌های متحرک"، جاده، 29(109)، ص.34-19.
-گهرپور، ع.ا. و آزموده، ح.، (1395)، "ارزیابی عملکرد سیستم حمل و نقل ترکیبی مترو با سایر شیوه‌های حمل و نقل به روش AHP (مطالعه موردی: ایستگاه صادقیه متروی تهران)"، جاده، 24(86)، ص.10-1.
-نادرنیا، ح. و شیرمحمدی، ح.، (1397)، "ارایه مدل بهینه حمل و نقل مسافران شهری با رویکرد ریسک"، جاده، 26(97)، ص.63-55.
-نبی­گل، ع. و حجت­پناه، ش. و معهود، م. و ظهرابی علی آبادی، خ.، (1398)، "بررسی تاثیر مدیریت ریسک در احداث ساختمانهای اداری با رویکرد استاندارد PMBOK (مطالعه موردی: ساختمان جدید سرپرستی شعب بانک صنعت و معدن)"، چهارمین کنفرانس بین­المللی پژوهش در علوم و مهندسی.
-نظری، ا. و جابری، م.، (1394)، "شناسائی ریسک پروژه­ها با رویکرد طراحی ساختار شکست ریسک، مطالعه موردی: سازمان صنعتی پروژه محور، نشریه بین المللی مهندسی صنایع و مدیریت تولید.
-نظــری، ا. و فرصــت کــار، ا. و کیــافر، ب.، (1387)، "مدیریت ریسک در پـروژه­هـا، معاونـت برنامه­ریزی و نظارت راهبردی رئیس جمهـوری".
-یاوری، ن.، (1400)، "مدیریت ریسک و تحلیل خطر بزرگراه شهید خرازی (همت تا کرج) با تاکید بر ژئومورفولوژی"، جاده.
-A. Dziadosz, M. Rejment, (2015), “Risk Analysis in Construction Project - Chosen Methods”, Procedia Engineering, 122,
pp. 258-265.
-Attada Vivek, C.H. Hanumantha Rao, (2022), “Identification and analysing of risk factors affecting cost of construction projects”, materials today proceedings, January.
-L. M. Khodeir, M. Nabawy, (2019), “Identifying key risks in infrastructure projects – Case study of Cairo Festival City project in Egypt”, Ain Shams Engineering Journal.
-M. S. B. Abd El-Karim, O. A. M. El Nawawy, A. M. Abdel-Alim, (2017),“Identification and assessment of risk factors affecting construction projects”, HBRC Journal, 13(2), pp.202-216.
- M. Wang, H. Chou, (2003), “Risk allocation and risk handling of highway projects in Taiwan”, J Manage Eng ASCE. 19, pp. 60-68.
-P. Szymański, (2017), “Risk management in construction projects”, Procedia Engineering, 208, pp. 174-182.
-Senthil J, M Muthukannan, (2021), “Predication of construction risk management in modified historical simulation statistical methods”, Ecological Informatics, Vol. 66, December.
-T. Wang, S. Wang, L. Zhang, Z. Huang, Y. Li, (2016), “A major infrastructure risk-assessment framework: Application to a cross-sea route project in China”, International Journal of Project Management, 34(7), pp.1403-1415.
-Ying Lu, Peizhen Gong, Yuchun Tang, Shuqi Sun, Qiming Li., (2021), “BIM-integrated construction safety risk assessment at the design stage of building projects”, Automation in Construction, Vol. 124, April.
-Zhen Tian, Qianqian Chen, Taihui Zhang, (2022), “A method for assessing the crossed risk of construction safety”, Safety Science, Vol. 146, February.