Effect of Basalt Fibers on the Bearing Capacity of Cement–Nanosilica-Stabilized Sand: An Physical Model Study

Document Type : Original Article

Authors
1 ِDepartment of Civil Engineering, Sha.C., Islamic Azad University, Shahrood, Iran.
2 Department of Civil Engineering, GKM.C., Islamic Azad University, Gonbad Kavoos, Iran.
Abstract
Sandy soils, particularly under low-density conditions, may lack sufficient bearing capacity and stiffness to sustain loads imposed by shallow foundations. This study investigated the performance of a multi-component soil improvement approach incorporating cement, nanosilica, and basalt fibers to enhance the bearing behavior of sand. A stepwise experimental program was designed to first determine the effects and optimum contents of cement (1, 3, and 6% by dry weight of sand) and nanosilica (2, 4, 8, and 16% by weight of cement) on bearing capacity, followed by an evaluation of basalt fibers (0.25, 0.50, 0.75, and 1% by dry weight of sand) in natural sand and sand stabilized with cement and cement–nanosilica mixtures. The soil behavior was evaluated using physical model plate load tests. Natural sand and fiber-reinforced specimens were tested without a curing period, whereas specimens containing cement and/or cement–nanosilica, with and without fibers, were tested after curing periods of 7, 14, and 28 days. The results showed that 6% cement and a combination of 6% cement + 8% nanosilica were identified as the optimum cement content and optimum cement–nanosilica combination, respectively. The optimum cement, cement–nanosilica, and cement–nanosilica–fiber combinations increased the bearing capacity by 237%, 313%, and 410%, respectively, compared with the untreated reference sand. Furthermore, the optimum fiber content depended on the stabilized matrix. The optimum basalt fiber content was 0.75% in both natural sand and cement-stabilized sand, whereas it decreased to 0.50% when cement and nanosilica were used simultaneously. These findings demonstrate that the effectiveness and optimum content of fibers depend on the type of stabilizer and the structure of the stabilized matrix. Therefore,a single fiber content cannot be considered universally optimal for different soil-improvement combinations without accounting for the characteristics of the stabilized matrix.
Keywords

-Adeniji, Mujeeb Adewale )2024(. Investigating the Influence of Soil Properties on Foundation Settlement and Bearing Capacity.
-Aksu Alcan, Bilge, and Semet Çelik )2023(. The Effect of Different Fiber Reinforcement on Bearing Capacity under Strip Foundation on the Sand Soil: An Experimental Investigation. Applied Sciences 13 (17): 9769.
-Amhadi, Talal S., and Gabriel J. Assaf )2021(.Improvement of Pavement Subgrade by Adding Cement and Fly Ash to Natural Desert Sand. Infrastructures 6 (11): 151.
-ASTM, D. )2003(. 1194-94: Standard Test Method for Bearing Capacity of Soil for Static Load and Spread Footings. ASTM International, West Conshohocken.
-ASTM, D1194 )1994(. Standard Test Method for Bearing Capacity of Soil for Static Load and Spread Footings. American Society for Testing and Materials: West Conshohocken, PA, USA.
-Bahmani, Sayed Hessam, Nima Farzadnia, Afshin Asadi, and Bujang BK Huat­) 2016.(The Effect of Size and Replacement Content of Nanosilica on Strength Development of Cement Treated Residual Soil. Construction and Building Materials 118: 294–306.
-Bayat, Meysam )2025(. Nanomaterials in Geotechnical Engineering: A Comprehensive Review on Soil Improvement Techniques. Civil Engineering Infrastructures Journal, ahead of print.
doi.org/10.22059/ceij.2025.380531.2125
-Chai, Yuan, Dai-Ping Jiang, Fu-Jiang Wang, and Hai-Bo Lyu. )2021.( Investigation of Engineering Properties of Cement‐Stabilized Calcareous Sand Foundation. Advances in Materials Science and Engineering 2021 (1): 9188560.
-Choobbasti, Asskar Janalizadeh, and Saman Soleimani Kutanaei. )2017(. Microstructure Characteristics of Cement-Stabilized Sandy Soil Using Nanosilica. Journal of Rock Mechanics and Geotechnical Engineering 9 (5): 981–88.
-Choobbasti, Asskar Janalizadeh, Ali Vafaei, and Saman Soleimani Kutanaei )2015(. Mechanical Properties of Sandy Soil Improved with Cement and Nanosilica. Open Engineering 5 (1).
-Consoli, NC, MDT Casagrande, A. Thomé, F. Dalla Rosa, and M. Fahey )2009(. Effect of Relative Density on Plate Loading Tests on Fibre-Reinforced Sand. Géotechnique 59 (5): 471–76.
-Consoli, Nilo C, Michéle DT Casagrande, Pedro DM Prietto, and Anto⁁ nio Thomé )­2003  .(Plate Load Test on Fiber-Reinforced Soil. Journal of Geotechnical and Geoenvironmental Engineering 129 (10):951–55.
-Consoli, Nilo Cesar, Márcio Antonio Vendruscolo, and Pedro Domingos Marques Prietto )2003(. Behavior of Plate Load Tests on Soil Layers Improved with Cement and Fiber. Journal of Geotechnical and Geoenvironmental Engineering 129 (1): 96–101.
-Ebrahimi, Amir, Aboozar Mirzakhani, Mohsen Mousivand, and Reza Samiromi. )2026 .(Effect of Biaxial Geogrid Rib Orientation on the Bearing Capacity and Deformation Response of Strip Footings beneath Bridges. Journal of Transportation Infrastructure Engineering, e10918.
-El-Emam, Magdi, Ruba Elmootassem, Haitham Badrawi, and Ashraf Amin )2023(. Bearing Capacity and Strength of
Fibre-Reinforced Sand: Experimental and Parametric Study
.
-Eshaghzadeh, Mehdi, Meysam Bayat, Rassoul Ajalloeian, and Sayyed Mahdi Hejazi )2021.( Mechanical Behavior of Silty Sand Reinforced with Nanosilica-Coated Ceramic Fibers. Journal of Adhesion Science and Technology 35 (23): 2664–83.
-Faramarzi, Mahdi, and Mohsen Mousivand. )2026 (Effects of Fibers on the Interfacial Shear Strength of a Two-Layer Bi-Material Polymer Concrete System. AUT Journal of Civil Engineering, ahead of print. doi.org/10.22060/ajce.2026.24923.5960
-Ghadr, Soheil, Arya Assadi-Langroudi, Ching Hung, Brendan C. O’Kelly, Hadi Bahadori, and Taher Ghodsi. (2020). Stabilization of Sand with Colloidal Nano-Silica Hydrosols. Applied Sciences 10 (15): 5192–5192.
-Ghasem Ghanbari, P., M. Momeni, M. Mousivand, and M. Bayat (2022). Unconfined Compressive Strength Characteristics of Treated Peat Soil with Cement and Basalt Fibre. International Journal of Engineering 35 (5): 1089–95.
-Hamidi, Amir, and Mahdi Hooresfand (2013). Effect of Fiber Reinforcement on Triaxial Shear Behavior of Cement Treated Sand. Geotextiles and Geomembranes 36: 1–9.
-(2017). Nanosilica Particle Size on the Water Permeability, Abrasion Resistance, Drying Shrinkage, and Repair Work Properties of Cement Mortar Containing Nano‐SiO2. Advances in Materials Science and Engineering  (1): 4213690.
-Hosseini, Seyed Amir Hossein, Meysam Bayat, Mohsen Mousivand, and Rassoul Ajalloeian (2025). Comparative Analysis of the Effects of Fibres, Cement and Biopolymer on Soil Improvement. Geomechanics and Geoengineering 20 (6): 1360–88.
-Hou, Pengkun, Jie Shi, Srinivas Prabakar, et al. (2020). Effects of Mixing Sequences of Nanosilica on the Hydration and Hardening Properties of Cement-Based Materials. Construction and Building Materials 263: 120226.
-Kasama, Kiyonobu, Andrew J. Whittle, and Kouki Zen (2012). Effect of Spatial Variability on the Bearing Capacity of Cement-Treated Ground. Soils and Foundations 52 (4):
600–619.
-Kumar, B. Narendra, M. Rushikesh, and A. Akhil Kumar (2024). An Experimental Study on High Strength Self-Compacting Concrete Inclusion of Zeolite and Silica Fume as a Potential Alternative Sustainable Cementitious Materials. Materials Today: Proceedings.
-Loukidis, D., and Rodrigo Salgado (2011). Effect of Relative Density and Stress Level on the Bearing Capacity of Footings on Sand.  Géotechnique 61 (2): 107–19.
-Mazouz, Badis, Ahmed Abderraouf Belkadi, Mudthir Bakri, et al. (2025). Model Testing and Response Surface Investigation of Eccentric Loading on Closely Spaced Strip Footings. Scientific Reports 15 (1): 41388.
-Noorzad, Reza, and Seyed Zarinkolaei (2015). Comparison of Mechanical Properties of
Fiber-Reinforced Sand under Triaxial Compression and Direct Shear. Open Geosciences 7 (October).
doi.org/10.1515/geo-2015-0041
-Rasouli, Habib, Hana Takhtfirouzeh, Abbasali Taghavi Ghalesari, and Roya Hemati (2017). Bearing Capacity Improvement of Shallow Foundations Using Cement-Stabilized Sand. Key Engineering Materials 723: 795–800.
-Roshani, Ehsan, Mohsen Mousivand, and Meysam Bayat (2025). Enhancing Mechanical Properties of Concrete Using
Polymer-Modified Recycled Carpet Fiber Composites. International Journal of Engineering 38 (10): 2321–33.
 doi.org/10.5829/ije.2025.38.10a.09.
-Sahlabadi, Seyed Hadi, Meysam Bayat, Mohsen Mousivand, and Mohsen Saadat. (2021). Freeze–Thaw Durability of Cement-Stabilized Soil Reinforced with Polypropylene/Basalt Fibers. Journal of Materials in Civil Engineering 33 (9): 04021232.
-Sam, Shilpa Mary, PK Jayasree, and Elsa Jacob Joseph (2022). Effect of Nano Silica on Dispersion and Strength Characteristics of Silty Soil. 79–92.
-Tafreshi, SN Moghaddas, and O. Khalaj (2008). Laboratory Tests of Small-Diameter HDPE Pipes Buried in Reinforced Sand under Repeated-Load. Geotextiles and Geomembranes 26 (2): 145–63.
-Wasti, Yildiz, and Mustafa Denizhan Bütün. (1996). Behaviour of Model Footings on Sand Reinforced with Discrete Inclusions. Geotextiles and Geomembranes 14 (10):
575–84.
-Wei, Houzhen, Tao Zhao, Qingshan Meng, Xinzhi Wang, and Jianqiao He. (2018). Experimental Evaluation of the Shear Behavior of Fiber-Reinforced Calcareous Sands. International Journal of Geomechanics 18 (12): 04018175.
-Wei, Wang, Wu Erlu, Huang Shuaishuai, Song Xingjiang, Li Na, and Jiang Ping. (2024). “Experimental Investigation on Static and Dynamic Properties of Nanosilica Modified Cement Soil. Construction and Building Materials 412: 134746–134746.
-Xu, Zhishan, Yongsheng Ji, Jie Zhang, Zhongzhe Zhang, Qi Xue, and Furong Gao. (2023). Mechanism of Nano-SiO2 Internal Generation for Modification of Cement-Based Materials. Journal of Building Engineering 76: 107247–107247.
-Yabaluie Khamesluei, Mohammad Reza, Meysam Bayat, Mohsen Mousivand, and Mohammad Amin Nozari (2024). Effect of Zeolite Replacement and Tyre Fibre Inclusions on Geotechnical Properties of Cement-or Lime-Stabilised Sand. Geomechanics and Geoengineering, 1–16.
 doi.org/10.1080/17486025.2024.2326087
-Yetimoglu, Temel, Muge Inanir, and Orhan Esat Inanir (2005). A Study on Bearing Capacity of Randomly Distributed
Fiber-Reinforced Sand Fills Overlying Soft Clay. Geotextiles and Geomembranes 23 (2): 174–83.