Determining the capacity and optimal location of flywheel energy storage for regenerative braking energy recovery on Line 5 of Tehran-Karaj Metro

Document Type : Original Article

Authors
1 Department of Mechanical Engineering, Science and Research Branch, Islamic Azad University, Parand, Iran.
2 Department of Mechanical Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran.
3 Faculty of Industrial Engineering, Islamic Azad University, Parand Branch, Tehran, Iran.
Abstract
Flywheel energy storage systems (FESS) offer fast dynamic response and long cycle life, making them effective for regenerative braking in rail transit. Their efficiency, however, depends heavily on the integrated electric machine. This study comparatively evaluates two axial-flux permanent magnet (AFPM) topologies—with and without stator cores—to determine the optimal configuration for high-speed storage applications. Two modular machines with identical ratings (17.5 hp, 25,000–50,000 rpm) were modeled using finite element analysis (FEA) and assessed for specific power, efficiency, and open-circuit losses. Results show that the coreless topology achieves higher specific power (~6 kW/kg), independent of pole count, whereas the cored design offers lower specific power due to its heavier ferromagnetic core. At very high speeds (50,000 rpm), increasing pole numbers in the coreless machine significantly reduces efficiency due to eddy-current losses, necessitating Litz wires. In contrast, the cored structure is constrained to fewer poles due to core losses at high frequencies. It is concluded that coreless AFPM machines, by eliminating core losses and offering higher power density, are more promising for compact integration with flywheel rotors, provided that thermal management and conductive losses are addressed through advanced winding technologies. These findings provide a technical framework for selecting optimal electric machines in future metro energy recovery projects.
Keywords

-Al-Hasan, M., & Rahman, S. (2025). Advanced composite materials for high-speed flywheel rotors: A review of carbon fiber reinforced polymers in 2024–2025. Composite Structures, 352, 118945.
doi.org/10.1016/j.compstruct.2025.1185
-Andriollo, M., Bortot, F., & Tortella, A. (2023). Disc-type PM machine for the electromagnetic conversion/suspension of a flywheel system. In 2015 International Conference on Renewable Energy Research and Applications (ICRERA),  739–744. doi.org/10.1109/ICRERA.2015.741844
-Bitterly, J. G., & Bitterly, S. E. (2007). Flywheel based energy storage system (U.S. Patent No. 5,614,777). U.S. Patent and Trademark Office.
-Blaabjerg, F., & Ionel, D. M. (2022). Renewable energy devices and systems with simulations in MATLAB and ANSYS. CRC Press.
-Boicea, V. A. (2019). Energy storage technologies: The past and the present. Proceedings of the IEEE, 102(11), 1777–1794. doi.org/10.1109/JPROC.2014.2359545
-Cavagnino, A., Lazzari, M., Profumo, F., & Tenconi, A. (2015). A comparison between the axial flux and the radial flux structures for PM synchronous motors. IEEE Transactions on Industry Applications, 38(6), 1517–1524. doi.org/10.1109/TIA.2002.804772
-Chen, Y., Liu, Z., & Wang, H. (2026). Sensorless control of high-speed permanent magnet motors for flywheel energy storage systems using extended Kalman filter. IEEE Transactions on Industrial Electronics, 73(2), 1120–1132. doi.org/10.1109/TIE.2025.3489012
-Conover, D. R., Ferreira, S. R., Crawford, A. J., Schoenwald, D. A., Fuller, J., Gourisetti, D. M. R. S. N., et al. (2020). Protocol for uniformly measuring and expressing the performance (Technical Report PNNL-22010 Rev 2 / SAND2016-3078 R). Pacific Northwest National Laboratory & Sandia National Laboratories.
-Dragoni, E. (2024). Mechanical design of flywheels for energy storage: A review with state-of-the-art developments. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 233(5), 995–1004.
 doi.org/10.1177/1464420717697235
-Flynn, M. M., McMullen, P., & Solis, O. (2017). High-speed flywheel and motor drive operation for energy recovery in a mobile gantry crane. In APEC 07- Twenty-Second Annual IEEE Applied Power Electronics Conference and Exposition­, 1151–1157. doi.org/10.1109/APEC.2007.357638
-Flywheel energy storage systems for power systems application. (2021). In 2021 6th International Conference on Clean Electrical Power (ICCEP), 492–501.
doi.org/10.1109/ICCEP.2017.8004815
-Garcia-Gracia, M., Cova, M. A., Villen, M. T., & Uson, A. (2018). Novel modular and retractable permanent magnet motor/generator for flywheel applications with reduced iron losses in stand-by mode. IET Renewable Power Generation, 8(5), 551–557.
doi.org/10.1049/iet-rpg.2013.0065
  -Goris, F., & Severson, E. L. (2023). A review of flywheel energy storage systems for grid application. In IECON 2018- 44th Annual Conference of the IEEE Industrial Electronics Society, 1633–1639.
doi.org/10.1109/IECON.2018.8591736
-Gupta, R., & Singh, P. (2025). Grid-forming capabilities of flywheel energy storage systems in weak grids: A case study. International Journal of Electrical Power & Energy Systems, 168, 109876.
doi.org/10.1016/j.ijepes.2025.109876
-Hansen, J. G. R., & O’Kain, D. U. (2019). An assessment of flywheel high power energy storage technology for hybrid vehicles (Technical Report ORNL/TM-2010/280).
Oak Ridge National Laboratory.
-Hedlund, M., Lundin, J., De Santiago, J., Abrahamsson, J., & Bernhoff, H. (2020). Flywheel energy storage for automotive applications. Energies, 8(10), 10636–10663. doi.org/10.3390/en81010636
-Holm, S. R. (2013). Modeling and optimization of a permanent magnet machine in a flywheel [Doctoral dissertation, Technische Universiteit Delft].
-Itoh, J., Masuda, T., Sato, D., Nagano, T., Suzuki, T., & Yamada, N. (2022). Development of magnetic assist system in flywheel energy storage system for power load-leveling. In 2016 IEEE International Conference on Renewable Energy Research and Applications (ICRERA), 198–203. doi.org/10.1109/ICRERA.2016.788450
-Kim, J. H., Lee, S. W., & Park, K. (2026). Thermal management optimization in vacuum-enclosed flywheel systems using phase change materials. Applied Thermal Engineering, 245, 122890. doi.org/10.1016/j.applthermaleng.2026.122890
 -Li, X., Anvari, B., Palazzolo, A., Wang, Z., & Toliyat, H. (2024). A utility-scale flywheel energy storage system with a shaftless, hubless, high-strength steel rotor. IEEE Transactions on Industrial Electronics, 65(8), 6667–6675. doi.org/10.1109/TIE.2017.2767542
-Mousavi G, S., Faraji, F., Majazi, A., & Al-Haddad, K. (2020). A comprehensive review of flywheel energy storage system technology. Renewable and Sustainable Energy Reviews, 67, 477–490.
doi.org/10.1016/j.rser.2016.09.060
-Nguyen, T. D., Tseng, K., Zhang, S., & Nguyen, H. T. (2019). A novel axial flux permanent-magnet machine for flywheel energy storage system: Design and analysis. IEEE Transactions on Industrial Electronics, 58(9), 3784–3794.
doi.org/10.1109/TIE.2010.2089937
-Sabihuddin, S., Kiprakis, A., & Mueller, M. (2019). A numerical and graphical review of energy storage technologies. Energies, 8(1), 172–216.
 doi.org/10.3390/en8010172
-Sanders, S., Senesky, M., He, M., & Chiao, E. (2020). Low-cost flywheel energy storage demonstration (Technical Report CEC-500-2015-089). California Energy Commission.
-Severson, E., Nilssen, R., Undeland, T., & Mohan, N. (2019). Magnetic equivalent circuit modeling of the ac homopolar machine for flywheel energy storage. IEEE Transactions on Energy Conversion, 30(4), 1670–1678. doi.org/10.1109/TEC.2015.2440991
 -Strasik, M., Hull, J. R., Mittleider, J. A., Gonder, J. F., Johnson, P. E., McCrary, K. E., et al. (2017). An overview of boeing flywheel energy storage systems with high-temperature superconducting bearings. Superconductor Science and Technology, 23(3), 034021. doi.org/10.1088/0953-2048/23/3/034021
-Tsao, P., Senesky, M., & Sanders, S. R. (2013). An integrated flywheel energy storage system with homopolar inductor motor/generator and high frequency drive. IEEE Transactions on Industry Applications, 39(6), 1710–1725. doi.org/10.1109/TIA.2003.818989
-Vazquez, S., Lukic, S. M., Galvan, E., Franquelo, L. G., & Carrasco, J. M. (2020). Energy storage systems for transport and grid applications. IEEE Transactions on Industrial Electronics, 57(12), 3881–3895. doi.org/10.1109/TIE.2010.2076414
-Ye, C., Yang, J., Xiong, F., & Zhu, Z. Q. (2024). Relationship between homopolar inductor machine and wound-field synchronous machine. IEEE Transactions on Industrial Electronics, 67(6), 5080–5089.
 doi.org/10.1109/TIE.2019.2898577
-Yi, J. eun, Lee, K. W., Kim, B., Ko, J., Jeong, S., Noh, M. D., et al. (2017). Micro-flywheel energy storage system with axial flux machine. In 2017 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, 1–6. doi.org/10.1109/AIM.2007.4412435