-Ahmaruzzaman, M. (2010). A review on the utilization of fly ash. Progress in Energy and Combustion Science, 36(3), 327-363.
-An, S., Ai, C., Ren, D., Rahman, A., & Qiu, Y. (2018). Laboratory and field evaluation of a novel cement grout asphalt composite, Journal of Materials in Civil Engineering, 30(8), 04018179.
-Anderton, G. L. (2000). Engineering properties of resin modified pavement (RMP) for mechanistic design.
-Bai, T., Liang, Y., Li, C., Jiang, X., Li, Y., Chen, A., Wang, H., Xu, F., & Peng, C. (2022). Application and validation of fly ash based geopolymer mortar as grouting material in porous asphalt concrete. Construction and Building Materials, 332, 127154.
-Bang, J. W., Lee, B. J., & Kim, Y. Y. (2017). Development of a semirigid pavement incorporating ultrarapid hardening cement and chemical admixtures for cement grouts. Advances in Materials Science and Engineering.
-Cai, X., Zhang, J., Zhang, H., Yao, Z., Chen, X., & Yang, J. (2020). Identification of microstructural characteristics in semi-flexible pavement material using micromechanics and nano-techniques. Construction and Building Materials, 246, 118426.
-Chen, Z., Qiao, J., Yang, X., Sun, Y., & Sun, D. (2023). A review of grouting materials for pouring semi-flexible pavement: Materials, design and performance. Construction and Building Materials, 379, 131235.
-Doma, H. K., & Ravi Shankar, A. (2023). State-of-the-Art of Grouting in Semi-flexible Pavement: Materials and Design. In Recent Trends in Construction Technology and Management, Springer.135-148.
-Fang, Y., Wang, X., Jia, L., Liu, C., Zhao, Z., Chen, C., & Zhang, Y. (2022). Synergistic effect of polycarboxylate superplasticizer and silica fume on early properties of early high strength grouting material for semi-flexible pavement. Construction and Building Materials, 319, 126065.
-Hassani, A., Taghipoor, M., & Karimi, M. M. (2020). A state of the art of semi-flexible pavements: Introduction, design, and performance. Construction and Building Materials, 253, 119196.
-Hlail, S. H. (2020). Toward semi flexible pavement application for Iraqi highway and airport pavements: Review its feasibility. Kerbala Journal for Engineering Science (2), 1-15.
-Hlail, S. H., Al-Busaltan, S., & Shaban, A. M. (2020). Sustainable Development of Highly Flowable Cementitious Grouts for Semi-flexible Pavement Mixture. IOP Conference Series: Materials Science and Engineering.
-Hlail, S. H., Al-Busaltan, S., & Shaban, A. M. (2021). Durability Evaluation: Sustainable Semi-flexible Pavement Mixtures. IOP Conference Series: Materials Science and Engineering.
-Hou, S., Xu, T., & Huang, K. (2017). Aggregate gradation influence on grouting results and mix design of asphalt mixture skeleton for semi-flexible pavement. Journal of Testing and Evaluation, 45(2),591-600.
-Husain, N. M., Karim, M. R., Mahmud, H. B., & Koting, S. (2014). Effects of aggregate gradation on the physical properties of semiflexible pavement. Advances in Materials Science and Engineering.
-Khan, M. I., Huat, H. Y., Dun, M. H. b. M., Sutanto, M. H., Jarghouyeh, E. N., & Zoorob, S. E. (2019). Effect of irradiated and non-irradiated waste PET based cementitious grouts on flexural strength of semi-flexible pavement. Materials, 12(24), 4133.
-Khan, M. I., Sutanto, M. H., Khan, K., Iqbal, M., Napiah, M. B., Zoorob, S. E., Klemeš, J. J., Bokhari, A., & Rafiq, W. (2022). Effective use of recycled waste PET in cementitious grouts for developing sustainable semi-flexible pavement surfacing using artificial neural network (ANN). Journal of Cleaner Production, 340, 130840.
-Khan, M. I., Sutanto, M. H., Napiah, M. B., Khan, K., & Rafiq, W. (2021). Design optimization and statistical modeling of cementitious grout containing irradiated plastic waste and silica fume using response surface methodology. Construction and Building Materials, 271, 121504.
-Khan, M. I., Sutanto, M. H., Napiah, M. B., Zoorob, S. E., Yusoff, N. I. M., Usman, A., & Memon, A. M. (2022). Irradiated polyethylene terephthalate and fly ash based grouts for semi-flexible pavement: design and optimisation using response surface methodology. International Journal of Pavement Engineering. 23(8), 2515-2530.
-Khan, M. I., Sutanto, M. H., Yusoff, N. I. M., Zoorob, S. E., Rafiq, W., Ali, M., Fediuk, R., & Vatin, N. I. (2022). Cementitious Grouts for Semi-Flexible Pavement Surfaces—A Review. Materials, 15(15), 5466.
-Koting, S., Karim, M. R., Mahmud, H., Mashaan, N. S., Ibrahim, M. R., Katman, H., & Husain, N. M. (2014). Effects of using silica fume and polycarboxylate-type superplasticizer on physical properties of cementitious grout mixtures for semiflexible pavement surfacing. The Scientific World Journal.
-Li, G., Xiong, H., Ren, Q., Zheng, X., & Wu, L. (2022). Experimental Study and Performance Characterization of Semi-Flexible Pavements. Coatings, 12(2), 241.
-Ling, S., Sun, Y., Sun, D., & Jelagin, D. (2022). Pore characteristics and permeability simulation of porous asphalt mixture in pouring semi-flexible pavement. Construction and Building Materials, 330, 127253.
-Luo, S., Yang, X., Zhong, K., & Yin, J. (2020). Open-graded asphalt concrete grouted by latex modified cement mortar. Road Materials and Pavement Design, 21(1), 61-77.
-Mayer, J., & Thau, M. (2001). Jointless pavements for heavy-duty airport application: The semi-flexible approach. In Advancing Airfield Pavements, 87-100.
-Mazloom, M., Ramezanianpour, A., & Brooks, J. (2004). Effect of silica fume on mechanical properties of high-strength concrete. Cement and Concrete Composites, 26(4), 347-357.
-Mukherjee, D., & Sahoo, U. C. (2019). Laboratory characterization of a cement grouted bituminous macadam made with Portland slag cement. International Journal of Pavement Research and Technology, 12(6), 574-580.
-Saboo, N., Ranjeesh, R., Gupta, A., & Suresh, M. (2019). Development of hierarchical ranking strategy for the asphalt skeleton in semi-flexible pavement. Construction and Building Materials, 201, 149-158. -Setiawan, A. (2009). Design and properties of hot mixture porous asphalt for semi-flexible pavement applications. Media Teknik Sipil, 5(2), 41-46.
-Setyawan, A. (2005). Design and properties of hot mixture porous asphalt for semi-flexible pavement applications. Jurnal Penelitian Media Teknik Sipil, Edisi Juli.
-Setyawan, A. (2013). Asessing the compressive strength properties of semi-flexible pavements. Procedia Engineering, 54, 863-874.
-Solouki, A., Tataranni, P., & Sangiorgi, C. (2022). Thermally Treated Waste Silt as Geopolymer Grouting Material and Filler for Semiflexible Pavements. Infrastructures, 7(8), 99.
-Songqiang, C., Jian, Z., Xi, W., & Zining, C. (2024). Research on innovative preparation and performance of semi flexible pavement materials. Case Studies in Construction Materials, e03050.
-Taghipoor, M., Hassani, A., & Karimi, M. M. (2021). Development of procedure for design and preparation of open-graded asphalt mixture used in semi-flexible pavement. Construction and Building Materials, 306, 124884.
-Uchikawa, H., Hanehara, S., & Hirao, H. (1996). Influence of microstructure on the physical properties of concrete prepared by substituting mineral powder for part of fine aggregate. Cement and Concrete Research, 26(1), 101-111.
-Van de Ven, M., & Molenaar, A. (2004). Mechanical characterization of combi-layer (with discussion). Journal of the Association of Asphalt Paving Technologists, 73.
-Xu, Y., Jiang, Y., Xue, J., Tong, X., & Cheng, Y. (2020). High-performance semi-flexible pavement coating material with the microscopic interface Optimization. Coatings, 10(3), 268.
-Zarei, S., Ouyang, J., Yang, W., & Zhao, Y. (2020). Experimental analysis of semi-flexible pavement by using an appropriate cement asphalt emulsion paste. Construction and Building Materials, 230, 116994.
-Zhang, J., Cai, J., Pei, J., Li, R., & Chen, X. (2016). Formulation and performance comparison of grouting materials for semi-flexible pavement. Construction and Building Materials, 115, 582-592.
-Zhang, Y., Wang, Y., Wu, Z.-G., Lu, Y.-M., Kang, A.-H., & Xiao, P. (2021). Optimal design of geopolymer grouting material for semi-flexible pavement based on response surface methodology. Construction and Building Materials, 306, 124779.
-Zhao, W., & Yang, Q. (2022). Influence analysis of performance of semi-flexible pavement based on aggregate distribution characteristics of matrix skeleton. Construction and Building Materials, 338, 127633.
