-Q. U. Ain, et al. (2020). Facile fabrication of hydroxyapatite-magnetite-bentonite composite for efficient adsorption of Pb(II), Cd(II), and crystal violet from aqueous solution. J. Clean. Prod.,Vol. 247, 119088.
-M. Imran Khan, F. Asfand, and S. G. Al-Ghamdi (2023). Progress in research and development of phase change materials for thermal energy storage in concentrated solar power. Appl. Therm. Eng.,Vol. 219, 119546.
-W. Wang, L. Fan, and B. Laumert (2021).A theoretical heat transfer analysis of different indirectly-irradiated receiver designs forhigh-temperature concentrating solar power applications. Renew. Energy, Vol. 163, 1983–1993.
-K. M. Powell, K. Rashid, K. Ellingwood, J. Tuttle, and B. D. Iverson (2017). Hybrid concentrated solar thermal power systems: A review. Renew. Sustain. Energy Rev., Vol. 80, 215–237.
-D. M. Ansari and G. J. Price (2004). Chromatographic estimation of filler surface energies and correlation with photodegradation of kaolin-filled polyethylene. Polymer (Guildf)., Vol. 45, No. 6, 1823–1831.
-H. M. Teamah (2023). Chapter 1 - Introduction and history of phase change materials’ heat transfer. In Phase Change Materials for Heat Transfer, H. Muhammad Ali, Ed. Elsevier, 1–26.
-P. Muthukumar and H. Niyas (202). Materials, Design and Development of Latent Heat Storage Systems for Medium and Large-Scale Applications: Issues and Challenges. in Encyclopedia of Renewable and Sustainable Materials, S. Hashmi and I. A. Choudhury, Eds. Oxford: Elsevier,417–437.
-R. Huang et al. (2021). Carbon precursors in coal tar: Extraction and preparation of carbon materials. Sci. Total Environ, vol. 788, 147697.
-A. Elgafy and K. Lafdi (2005). Effect of Carbon Nanofiber Additives on the Thermal Behavior of Phase Change Materials Carbon N. Y., Vol. 43, No. 15, 3067–3074.
-K. B, A. K. Pandey, S. Shahabuddin, M. Samykano, T. M, and R. Saidur (2020). Phase change materials integrated solar thermal energy systems: Global trends and current practices in experimental approaches. J. Energy Storage, Vol. 27, 101118.
-K. Pielichowska and K. Pielichowski (2014). Phase change materials for thermal energy storage,” Prog. Mater. Sci., Vol. 65, 67–123.
-B. Xu, P. Li, and C. Chan (2015). Application of phase change materials for thermal energy storage in concentrated solar thermal power plants: A review of recent developments. Appl. Energy, Vol. 160,286–307.
-P. Denholm and M. Hand (2011). Grid flexibility and storage are required to achieve very high penetration of variable renewable electricity. Energy Policy, Vol. 39, Vol. 3, 1817–1830.
-M. Khan, F. Asfand, and S. G. Al-Ghamdi (2022). Progress in Research and Development of Phase Change Materials for Thermal Energy Storage in Concentrated Solar Power. Appl. Therm. Eng.,Vol. 219, 119546.
-R. K. Sharma, P. Ganesan, V. V Tyagi, H. S. C. Metselaar, and S. C. Sandaran (2015). Developments in organic solid–liquid phase change materials and their applications in thermal energy storage. Energy Convers. Manag., Vol. 95,193–228.
-A. Sharma, V. V., Tyagi, C. R. Chen, and D. Buddhi (2009). Review on thermal energy storage with phase change materials and applications. Renew. Sustain. Energy Rev., Vol. 13, No. 2,318–345.
-J. J. Jurinak and S. I. Abdel-Khalik (1979). On the performance of air-based solar heating systems utilizing phase-change energy storage. Energy,Vol. 4, No. 4, 503–522.
-P. Pinel, C. A., Cruickshank, I.Beausoleil-Morrison, and A. Wills (2011). A review of available methods for seasonal storage of solar thermal energy in residential applications. Renew. Sustain. Energy Rev., Vol. 15, No. 7, 3341–3359.
-P. Tatsidjodoung, N. Le Pierrès, and L. Luo, (2013). A review of potential materials for thermal energy storage in building applications. Renew. Sustain. Energy Rev., Vol. 18, 327–349.
-A. Avdeef (2007). Solubility of sparingly soluble ionizable drugs. Adv. Drug Deliv. Rev.., Vol. 59,No. 7, 568–590-591.
-Y. Huang, A. Stonehouse, and C. Abeykoon (2023). Encapsulation methods for phase change materials – A critical review. Int. J. Heat Mass Transf., Vol. 200, 123458.
-A. F. Nicholas, M. Z. Hussein, Z. Zainal, and T. Khadiran (2019). Chapter 12 - Activated Carbon for Shape-Stabilized Phase Change Material. in Synthesis, Technology and Applications of Carbon Nanomaterials, S. A. Rashid, R. N. I. Raja Othman, and M. Z. Hussein, Eds. Elsevier, 279–308.
-Z. Wang, Design of Solar Thermal Power Plants.
-C. Alkan, E. Günther, S. Hiebler, Ö. Ensari, and D. Kahraman92012). Polyethylene glycol-sugar composites as shape-stabilized phase change materials for thermal energy storage. Polym. Compos., Vol. 33.
-A. B R, U. Sahoo, and P. Rath (2020). Phase change materials for pavement applications: A review. Constr. Build. Mater., Vol. 247, 118553.
-J. Jin et al. (2017). Preparation and thermal properties of mineral-supported polyethylene glycol as form-stable composite phase change materials ({CPCMs}) used in asphalt pavements. Sci. Rep., Vol. 7, No. 1, 16998, Dec.
-Y. Kou et al. (2018). Thermal analysis and heat capacity study of polyethylene glycol (PEG) phase change materials for thermal energy storage applications. J. Chem. Thermodyn., Vol. 128.
-T. Karlessi, M. Santamouris, K. Apostolakis, A. Synnefa, and I. Livada (2009). Development and testing of thermochromic coatings for buildings and urban structures. Sol. Energy, Vol. 83, No. 4,538–551.
-S. N. AL-Saadi and Z. (John) Zhai, (2013). Modeling phase change materials embedded in building enclosures: A review. Renew. Sustain. Energy Rev., Vol. 21, 659–673.
-C. Alkan, E. Günther, S. Hiebler, Ö. Ensari, and D. Kahraman (2012). Polyurethanes as solid-solid phase change materials for thermal energy storage. Sol. Energy, Vol. 86, 1761-1762.
-H. Alimohammadi, J. Zheng, A. Buss, V. R. Schaefer, C. Williams, and G. Zheng (2020). Field and simulated rutting behavior of hot mix and warm mix asphalt overlays. Constr. Build. Mater., Vol. 265, 120366.
-B. Athukorallage, T. Dissanayaka, S., Senadheera, and D. James (2018). Performance analysis of incorporating phase change materials in asphalt concrete pavements. Constr. Build. Mater., Vol. 164, 419–432.
-G. Alva, Y. Lin, L. Liu, and G. Fang (2017). Synthesis, characterization, and applications of microencapsulated phase change materials in thermal energy storage: A review. Energy Build., Vol. 144, 276–294.
-B. Athukorallage and D. James (2016). Incorporating Phase Change Materials to Mitigate Extreme Temperatures in Asphalt Concrete Pavements, V008T10A043.
-X. Wang et al. (2023). Review of the application of phase change materials in asphalt pavement. J. Traffic Transp. Eng. (English Ed., Vol. 10, No. 2, 185–229.
-S. Alay, F. Gode, and C. Alkan (2011). Synthesis and Thermal Properties of Poly(n-butyl acrylate)/n-Hexadecane Microcapsules Using Different Cross-Linkers and Their Application to Textile Fabrics. J. Appl. Polym. Sci., Vol. 120, 2821–2829.
-M. R. M. Aliha, (2019). On predicting mode II fracture toughness (KIIc) of hot mix asphalt mixtures using the strain energy density criterion. Theor. Appl. Fract. Mech., Vol. 99, 36–43.
-Y. Farnam, S. Dick, A. Wiese, J. Davis, D. Bentz, and J. Weiss (2015). The influence of calcium chloride deicing salt on phase changes and damage development in cementitious materials (2015). Cem. Concr. Compos., vol. 64, 1–15.
-A. Arora, G. Sant, and N. Neithalath (2017). Numerical simulations to quantify the influence of phase change materials (PCMs) on the early- and later-age thermal response of concrete pavements. Cem. Concr. Compos., Vol. 81, 11–24.
-D. Bentz and R. Turpin (2007). Potential Applications of Phase Change Materials in Concrete Technology. Cem. Concr. Compos., Vol. 29,527–532.
-T.-C. Ling and C.-S. Poon (2013). Use of phase change materials for thermal energy storage in concrete: An overview,” Constr. Build. Mater.Vol. 46, 55–62.
-A. R. Sakulich and D. P. Bentz (2012). Incorporation of phase change materials in cementitious systems via fine lightweight aggregate. Constr. Build. Mater., Vol. 35, 483–490.
-J. Pereira da Cunha and P. Eames (2016). Thermal energy storage for low and medium temperature applications using phase change materials – A review. Appl. Energy, Vol. 177, 227–238.
-A. Sharma, A. Shukla, C. R. Chen, and T.-N. Wu (2014). Development of phase change materials (PCMs) for low-temperature energy storage applications. Sustain. Energy Technol. Assessments, Vol. 7, 17–21.
-R. F. W. Boarder, P. L. Owens, and J. M. Khatib (2016). The sustainability of lightweight aggregates manufactured from clay wastes for reducing the carbon footprint of structural and foundation concrete. In Sustainability of Construction Materials (Second Edition), Second Edi., J. M. Khatib, Ed. Woodhead Publishing, 209–244.
-L. Liston, Y. Farnam, M, Krafcik, W. Weiss, K. Erk, and B. Tao (2015). Binary mixtures of fatty acid methyl esters as phase change materials for low temperature applications. Appl. Therm. Eng.,Vol. 96.
-A. F. Regin, S. C. Solanki, and J. S. Saini (2008). Heat transfer characteristics of thermal energy storage system using PCM capsules: A review. Renew. Sustain. Energy Rev., Vol. 12, No. 9,2438–2458.
-Y. Farnam, H. S. Esmaeeli, P. Zavattieri, J. Haddock, and W. Weiss (2017). Incorporating phase change materials in concrete pavement to melt snow and ice. Cem. Concr. Compos., Vol. 84,134–145.
-G. Kastiukas, X. Zhou, and J. Castro-Gomes (2016). Development and optimisation of phase change material-impregnated lightweight aggregates for geopolymer composites made from aluminosilicate-rich mud and milled glass powder. Constr. Build. Mater., Vol. 110, 201–210.
-M. Kheradmand, J., Castro-Gomes, M. Azenha, P. D., Silva, J. L. B. de Aguiar, and S. E. Zoorob (2015). Assessing the feasibility of impregnating phase change materials in lightweight aggregate for the development of thermal energy storage systems. Constr. Build. Mater., Vol. 89, 48–59.
-A. Abhat (1983). Low temperature latent heat thermal energy storage: Heat storage materials. Sol. Energy, Vol. 30, No. 4, 313–332.
-Standard {Test} {Method} for {Compressive} {Strength} of {Hydraulic} {Cement} {Mortars} ({Using} 2-in. or )50-mm {Cube} {Specimens}).
-W.-C. Choi, B.-S. Khil, Y.-S. Chae, Q.-B. Liang, and H.-D. Yun (2014). Feasibility of using phase change materials to control the heat of hydration in massive concrete structures. ScientificWorldJournal, Vol. 2014, 781393.
-J. Castro, L. Keiser, M. Golias, and J. Weiss (2011). Absorption and desorption properties of fine lightweight aggregate for application to internally cured concrete mixtures. Cem. Concr. Compos., Vol. 33, No. 10, 1001–1008.
-Z. Chen, L., Cao, F., Shan, and G. Fang (2013). Preparation and characteristics of microencapsulated stearic acid as a composite thermal energy storage material in buildings. Energy Build., Vol. 62,469–474.
-F. Althoey and Y. Farnam (2020). Performance of {Calcium} {Aluminate} {Cementitious} {Materials} in the {Presence} of {Sodium} {Chloride}. J. Mater. Civ. Eng., Vol. 32, No. 10, 4020277.
-D. W. Hawes, D. Banu, and D. Feldman (1992). The stability of phase change materials in concrete. Sol. Energy Mater. Sol.. Cells, Vol. 27, No. 2,103–118.
-L. Hembade, N. Neithalath, and S. Rajan (2014). Understanding the Energy Implications of Phase-Change Materials in Concrete Walls through Finite-Element Analysis. J. Energy Eng., Vol. 140, 4013009.
-J. Monical, E. Unal, T. Barrett, Y. Farnam, and W. J. Weiss (2016). Reducing {Joint} {Damage} in {Concrete} {Pavements}: {Quantifying} {Calcium} {Oxychloride} {Formation},” Transp. Res. Rec. J. Transp. Res. Board, Vol. 2577, No. 1, 17–24.
-Y. Farnam et al. (2015). Evaluating the Use of Phase Change Materials in Concrete Pavement to Melt Ice and Snow. J. Mater. Civ. Eng., 4015161.
-R, {A}. {B}., {Sahoo}, {U}. {C}., \& {Rath}, {P}. (2021b). {Thermal} and mechanical performance of phase change material incorporated concrete pavements. {Road} {Materials} and {Pavement} {Design}, 23(6), 1287–1304. doi.org/10.1080/14680629.2021.1
-F. Fernandes et al., (2014). On the Feasibility of Using Phase Change Materials (PCMs) to Mitigate Thermal Cracking in Cementitious Materials. Cem. Concr. Compos., Vol. 51.
-V. V. Tyagi and D. Buddhi (2007). PCM thermal storage in buildings: A state of the art. Renew. Sustain. Energy Rev., Vol. 11, No. 6, 1146–1166.
-L. F. Cabeza, C. Castellón, M. Nogués, M. Medrano, R. Leppers, and O. Zubillaga (2007). Use of microencapsulated PCM in concrete walls for energy savings. Energy Build., Vol. 39, No. 2,113–119.
-C. Yaling, S. Yu, and W. Zhen-ming (2009). Evaluation of thermal stability of embankments with different strikes in permafrost regions. Cold Reg. Sci. Technol. - COLD REG SCI TECHNOL, Vol. 58, 151–157.
-Y. Qin (2011). Modeling temperature distribution in rigid pavement slabs: Impact of air temperature,” Constr. Build. Mater. - CONSTR BUILD MATER, Vol. 25, 3753–3761.
-G. De Schutter (2002). Finite element simulation of thermal cracking in massive hardening concrete elements using degree of hydration-based material laws. Comput. Struct., Vol. 80, No. 27, 2035–2042.
-M. Azenha, R. Faria, and D. Ferreira (2009). Identification of early-age concrete temperatures and strains: Monitoring and numerical simulation. Cem. Concr. Compos., Vol. 31, No. 6, 369–378.
-R. Faria, M. Azenha, and J. A. Figueiras (2006). Modelling of concrete at early ages: Application to an externally restrained slab.Cem. Concr. Compos., Vol. 28, No. 6, 572–585.
-Q. Xu, J., Ruiz, J., Hu, K. Wang, and R. Rasmussen (2011). Modeling hydration properties and temperature developments of early-age concrete pavement using calorimetry tests. Thermochim. Acta - THERMOCHIM ACTA, Vol. 512, 76–85.
-G. De Schutter (2004). Applicability of the degree of hydration concept and the maturity method for thermo-visco-elastic behaviour of early age concrete. Cem. Concr. Compos., 437–443.
-A. Thiele, A. Kumar, G. Sant, and L. Pilon (2014). Effective thermal conductivity of three-component composites containing spherical capsules. Int. J. Heat Mass Transf., Vol. 73, 177–185.
-B. A. Young et al. (2017). Early-age temperature evolutions in concrete pavements containing microencapsulated phase change materials. Constr. Build. Mater., Vol. 147, 466–477.
-A. S. Hariri and I. C. Ward (1988). A review of thermal storage systems used in building applications. Build. Environ., Vol. 23, No. 1, 1–10.
-Y. Zhang, G. Zhou, K. Lin, Q. Zhang, and H. Di (2007). Application of latent heat thermal energy storage in buildings: State-of-the-art and outlook. Build. Environ., Vol. 42, 2197–2209.
-N. Soares, J. J., Costa, A. R. Gaspar, and P. Santos (2013). Review of passive PCM latent heat thermal energy storage systems towards buildings’ energy efficiency. Energy Build., vol. 59, 82–103.
-N. Zhu, Z. Ma, and S. Wang (2009). Dynamic Characteristics and Energy Performance of Buildings Using Phase Change Materials: A Review. Energy Convers. Manag., Vol. 50, 3169–3181.
-G. W. Scherer, “Crystallization in pores (1999). Cem. Concr. Res., Vol. 29, No. 8, 1347–1358.
-N. P. Mayercsik, M. Vandamme, and K. E. Kurtis (2016). Assessing the efficiency of entrained air voids for freeze-thaw durability through modeling. Cem. Concr. Res., Vol. 88, 43–59.
-R. Polat (2016). The effect of antifreeze additives on fresh concrete subjected to freezing and thawing cycles. Cold Reg. Sci. Technol., Vol. 127, 10–17.
-S. Riyazi, J. Kevern, and M. Mulheron (2017). Super absorbent polymers (SAPs) as physical air entrainment in cement mortars. Constr. Build. Mater., Vol. 147, 669–676.
-Y. Deng, X. Luo, Y. Zhang, and R. L. Lytton (2021). Evaluation of flexible pavement deterioration conditions using deflection profiles under moving loads. Transp. Geotech., Vol. 26, 100434.
-Y. Du, J. Chen, Z. Han, and W. Liu (2018).A review of solutions for improving the rutting resistance of asphalt pavement and test methods. Constr. Build. Mater., Vol. 168, 893–905.
-W. Jiang, A. Sha, J. Xiao, Z. Wang, and A. Apeagyei (2016). Experimental study on materials composition design and mixture performance of water-retentive asphalt concrete. Constr. Build. Mater., Vol. 111, 128–138.
-V. Jagadeeswara Reddy, M. Fairusham Ghazali, and S. Kumarasamy (2024). Innovations in phase change materials for diverse industrial applications: A comprehensive review. Results Chem., Vol. 8, 101552.
-S. Liao et al. (2024). Development of Macro-Encapsulated Phase-Change Material Using a Composite of NaCl-Al2O3 with Characteristics of Self-Standing. Processes, Vol. 12, No. 6.
